PhD(c) Researcher @warclab. Electronic Engineer. IoT, FPGAs, MCUs.
Published Dec 15, 2017
As I start down the road of building complex systems with the Xilinx Zynq platform, I’ve decided to document what I’m learning from using the device as a record of what I’m doing as well as documentation for others using this PSoC (Programmable System on Chip) and tool chain.
The Zedboard is a Digilent Development Board for the Xilinx Zynq-7000 SoC (AP SoC). The Zynq platform is particularly interesting as it includes both a processing systems (PS) and programmable logic layer (PL). In essence, this means that the user has access to a full general purpose processor, which is accompanied by the logical fabric of an FPGA.
My interest for using the Zedboard relates to two aspects of the development board; the SoC and the FMC connector (the port on the right side of the board). I’m intending to use the Xilinx Zynq SoC as an adaptive baseband controller of a Software Defined Radio System. This is in part, to the lead up of my thesis, of which this research will help me to determine the topic.
These posts are for anyone looking at getting into programmable logic development, software defined radio or simply interested in following what I’m working on. My philosophy is that the best way to learn is to teach and hopefully by sharing these posts and tutorials, I’ll reinforce what I’ve been working on as well as create a record for my own sanity!
I intend to use these medium posts as a way to talk in more detail about some of the following topics.